ISOTHERM

Anti-mold/anti-condensation products

Anti-condensation water paint, with sanitizing features and high thermal insulation for interior. Its particular characteristics are due to special hollow charges which give the paint the ability to prevent the cooling of the surfaces in contact with the exterior and the subsequent condensation of moisture on them. Hindering the thermal dispersion, it promotes energy savings. Thanks to its properties and the content of specific hygienizing agents Isotherm effectively hinders the proliferation of mold and so it is particularly suitable in environments with specific problems such as, kitchens, baths, laundry rooms, swimming pools, etc. …

Specifications

COMPOSITION extremely pure acrylic resin, titanium dioxide, hollow glass microspheres, calcined kaolins, lamellar silicates, crystalline calcium carbonates
DRIED PRODUCT APPEARANCE mat, slightly rough to the touch
SOLID CONTENT 51%±2
PARTICLE SIZE 60-70 μ
VISCOSITY AT 20° C 22.000 cps ± 1.500 cps (A6 20’)
AVERAGE THICKNESS OF THE FILM 60 μ
STRENGTH OF ADHESION TO THE SUBSTRATE good
PH 8,5-9
APPLICATION brush, roller
DILUTION 15% approx. with water
YIELD 2-3 sqm/lt, for 2 coats
DRYING TIME to touch 1 hour, dry in depth approx. 18 hours, under normal conditions of temperature and humidity
RECOAT 3-4 hours
caf_isotherm


14 L – 5 L

caf-icon-03Protect from frost

caf-icon-01White

caf-icon-04Use water immediately
after use

caf_pdf-02Data Sheet

caf_pdf-01Security Card

painting for interior use