SILICAF INTONACHINO

Silicate line in accordance with DIN 18363

Outdoor wall coating based on modified potassium silicate, adhesion promoters, inorganic pigments, marble slivers, quartz powder, stabilizing additives. The formulation based on silicates gives the product the following characteristics: breathability, light stability and weathering. After drying, Silicaf Intonachino reacts with carbon dioxide forming the colloidal silica which, combine with the support on which it is applied, consolidates it. The crystallization of the silica creates a microcrystalline structure that does not alter the porosity of the plaster and then its breathability. For all these characteristics and for the aesthetic effect very similar to that of the ancient colored plasters, Silicaf Intonachino is ideal for the restoration and the coating of buildings of considerable artistic interest. The product can still be used in all those cases where you do not want to remove the wall breathability.

Specifications

COMPOSITION Modified potassium silicate, inorganic pigments, selected grits, stabilizers, synthetic binders not exceeding 5%
APPEARANCE OF DRIED PRODUCT Matt
SOLID CONTENT 79%± 2
PARTICLE SIZA Fine-grained 0,6 mm; medium-grained 0,8 mm; coarse-grained 1,2 mm
VISCOSITY Thick paste trowellable
ABRASION RESISTANCE Excellent
AVERAGE COATING THICKNESS 2-3 mm
WEATHERING RESISTANCE Excellent
STRENGTH OF ADHESION TO THE SUBSTRATE Excellent
WATER VAPOR DIFFUSION Excellent
PH 10-12
APPLICATION Steel/plastic trowel
DILUTION Ready to use
YIELD (2 coats) fine-grained 2,2 kg/sqm; medium-grained 3 kg/sqm; coarse-grained 4 kg/sqm,  depending on the surface
caf_linea_minerale

caf-icon-02 25 KG

caf-icon-03Protect from frost

caf-icon-01white, Allegro color chart, tints on request


The coloring is possible with
the Tinting System Allegro

caf-icon-04Use water immediately
after use

caf_pdf-02Data Sheet

caf_pdf-01Security Card

Products for exterior use