MICOSTOP
Anti-mold/anti-condensation products
Sanitizing and hygienizing water-based paint for the restoration of heavily decayed surfaces. Specifically designed for the ultimate prevention and resolution of all the problems caused by molds found within home environments. It is employed in those places where there is a demand for a high degree of hygiene, such as hospitals, community, public meeting places, wineries, food industries and civil houses in general. It is equipped with an exceptional resistance to dirt and stain removability and it preserves for a long time its qualities of whiteness and protection of the walls, greatly extending the time of maintenance of the same. This product was subjected to the evaluation of resistance to mold according to UNI 9805 (certification n. 88377 issued by Istituto Giordano SpA).
Specifications
COMPOSITION | vinylversatic copolymers, titanium dioxide, kaolin, silicates, crystalline calcium carbonate, active substances with a wide spectrum of action |
DRIED PRODUCT APPEARANCE | matt |
SOLID CONTENT | 68%±1 |
PARTICLE SIZE | 3-5 μ |
VISCOSITY AT 20 ° C | 25.000 cps ± 1.500 cps (A6 20’) |
AVERAGE THICKNESS OF THE FILM | 60 μ |
RUBBING RESISTANCE | good |
STRENGTH OF ADHESION TO THE SUBSTRATE | good |
PH | 8-8,5 |
APPLICATION | brush, roller, spray |
DILUTION | 30-40% approx. with water |
YIELD | 4-5 mq/lt for 2 coats |
DRYING TIME | to touch 1 hour, dry in depth approx. 18 hours, under normal conditions of temperature and humidity |
RECOAT | 5-6 hours |

14 L – 4 L
Protect from frost
White, Allegro color chart,
NCS color chart, tints on request
The coloring is possible with
the ALLEGRO Tinting System
Use water immediately
after use